We can equip the gate with signal lights. We provided two alternatives:
Turck complete signal tower with base and yellow light is included in the scope delivery
Eaton system: the components can be selected as required
| # | Item Number | Description | Type | Type | E-Number |
|---|---|---|---|---|---|
| 1 | 210324 | Turck Signal post TL50YQ | Yellow | Light | 3010067 |
| 2 | IMA-10821076 | Eaton Light SL7-CB-400 | Base | 400mm | 171445 |
| 3 | IMA-10821080 | Eaton Light SL7-L24-W | White | Light | 171464 |
| 4 | IMA-10821083 | Eaton Light SL7-L24-B | Blue | Light | 171461 |
| 5 | IMA-10821084 | Eaton Light SL7-L24-Y | Yellow | Light | 171465 |
| 6 | IMA-10821085 | Eaton Light SL7-L24-G | Green | Light | 171462 |
| 7 | IMA-10821086 | Eaton Light SL7-L24-R | Red | Light | 171463 |
| 8 | IMA-10821089 | Eaton Acoustic element SL7-AP24 | Acoustic | Element | 171281 |
According to the standard, the panels cannot be assembled to be swiveled. No hinges can be used. Then the safety fence can be used like a gate.
A special bracket set with connection material is available for special angles
During assembly, standard suspension parts are replaced by special angle sets
| # | Item Number | Description |
|---|---|---|
| 1 | 121.085.9020 | Standard angle set 90° with screws |
| 2 | 121.085.9030 | Special angle set 30° with screws |
| 3 | 121.085.9045 | Special angle set 45° with screws |
We supply cable ducts including clamping components for our system and earthing options.
| # | Item Number | Description |
|---|---|---|
| 1 | 121.085.9029 | Connection element |
| 2 | 208 490 | Cable channel |
We also produce special mesh panels according to customer requirements. For steel mesh panels taller than 2250 mm or wider than 1916 mm, reinforcements are required to keep the panel stable on the post during collision.
| # | Item Number | Description | Application |
|---|---|---|---|
| 1 | 121.085.9046 | Centre reinforcement | Center post 50x50 |
| 2 | 121.085.9047 | Lateral reinforcement | End post or corner post 50x50 |
| 3 | 121.085.9048 | Lateral reinforcement | Door post 90x50 |
The number of stiffeners per post depends on the impact energy. The calculation is shown in the table below.
| # | Impact energy | Number of stiffeners for higher frames [N1] | Number of stiffeners for wider frames [N2] | Total number per post [N] |
|---|---|---|---|---|
| 1 | E = 176 J | N1 = ABRUNDEN(H/2300;0) | N2 = ABRUNDEN(L/2000;0) | N = N1 + N2 |
| 2 | E = 370 J | N1 = ABRUNDEN(H/2300;0) | N2 = ABRUNDEN(L/2000;0) | N = N1 + N2 |
| 3 | E = 882 J | N1 = ABRUNDEN(H/2300;0) | N2 = ABRUNDEN(L/2000;0) | N = N1 + N2 |
The protective fence components are prepared for electrical connection with a copper conductor H07V-K 10 mm2. The components are provided with pre-drilled holes with a diameter of 5.3 mm for self-tapping M6 screws. Complete cable sets with screws and washers are also supplied.
| # | Item Number | Quantity | Description | Application |
|---|---|---|---|---|
| 1 | 121.085.9027 | 5 | Earthing cable 150 mm with connecting material | For all SG and MS panels and cable channels |
| 2 | 121.085.9028 | 5 | Earthing cable 200 mm with connecting material | For all SG and MS revolving doors |
